Lineup
Maximum Working Pressure: 25 MPa
Maximum Working Pressure: 30 MPa
Maximum Working Pressure: 50 MPa
Options
| Descaling Check Valve |
|---|
|
Optimized internal structure offers less pressure loss which results in high impact force. |
| Screw Remover (Nozzle Remover) |
|---|
|
Attach the Screw Remover to the nozzle tip groove after removing the cap and turn the handle to remove the nozzle. |
| C Remover (Nozzle Remover) |
|---|
|
Loosen the cap after attaching the C Remover to the nozzle tip groove to remove the nozzle. |
| Pull Out Remover (Nozzle Remover) |
|---|
|
Attach the Pull Out Remover to the nozzle tip groove after removing the cap and pull the handle to remove the nozzle. |
| Blind Tip |
|---|
|
Attach the Blind Tip in place of a nozzle when performing a width cut on rolled steel products. It may also be used for tests on header pressure resistance. |
| Protective Cap |
|---|
|
Protects the nozzle and adapter from damage caused by rebounds from scaling or descaling water. |
| Long Nose Tip |
|---|
|
Effective for testing reduction of spray distance with existing equipment. |
| Long Adapter |
|---|
|
Use the Long Adapter to adjust the optimum spray distance when the ascent/descent of the descaling header is difficult. |
| Nozzle Assembly Tool |
|---|
|
Use the Nozzle Assembly Tool when assembling the nozzle tip and filter. |
