About Air Mist Nozzles
Home > Technical Support > About Air Mist Nozzles
1. Mixing liquid with air produces smaller particle size than size produced by
    water nozzles.
2. Larger orifice than that of single fluid nozzles can reduce clogging with foreign matter.
3. Wide flows rate control range
4. The larger percentage of air (air-water volume ratio), the smaller particle sizes.
    The following two methods are used for mixing liquid with gas.
Liquid and air are mixed in the nozzle. This method is generally applicable to flow rates from low to high.
In this method, liquid and air are mixed outside the nozzle, and there are the following two systems.
1.Pressure system
This system incorporates a pump or pressure tank to feed liquid under pressure.
2.Siphon system
This system incorporates the suction effect of gas to feed liquid.