The Everloy Advantage Spray Nozzle Analysis and Evaluation Technologies

Home > The Everloy Advantage-Spray Nozzle Analysis and Evaluation Technologies

Spray Nozzle Analysis and Evaluation Technologies

Spray Nozzle Analysis and Evaluation Technologies

Spray Nozzle Analysis and Evaluation Technologies Imge1

Spray nozzle performance is dependent on the factors such as pressure, flow rate, spray pattern, particle size, velocity, flow distribution and impact force distribution, etc. We offer the optimal spray nozzles with our analysis and evaluation technologies.

  • Fluid Analysis

    We are now able to visualize a more approximate the actual performace by our many years of research and our accumulated analysis evaluation.

  • Water Distribution Measurement Device

    We measure water distribution through spraying an acrylic container over a set amount of time.

  • Impact Force Distribution Evaluation Equipment

    The Impact Force Distribution Evaluation Equipment continually scans a jet spray using a pressure sensor, allowing us to find out the impact force distribution.

  • Particle Size & Flow Velocity Analysis Equipment

    Particle size measurements using the Phase Doppler Method can measure particle size and velocity simultaneously through particle analysis using the Doppler principle together with lasers.

  • Particle Image Analysis Equipment

    The Particle Image Analysis Equipment can find the mean particle size and particle distribution. A strobe light illuminates the spray, and a CCD camera takes multiple photographs, which are then analyzed on a computer.

  • Cooling Performance Evaluation Equipment

    For cooling capacity, a heat sensor is embedded in the target object, the object is heated, and then the object is sprayed. Through this we can determine the heat transfer coefficient distribution and mean heat transfer coefficients.

If you are searching for the optimal spray nozzle, please don't hesitate to contact us.

Contact us here

pagetop